 |
Part Number |
Description |
Comments |
Principal Application |
Element to be Converted |
Spin-On Replacement |
|
| |
24001 |
Hydraulic Installation Kit |
For fluid flow rates up to 12 gallons per minute, with a maximum working pressure of 100 psi. |
|
|
|
|
| |
24034 |
Hydraulic Installation Kit |
For fluid flow rates up to 12 gallons per minute, with a maximum working pressure of 100 psi. |
|
|
|
|
| |
24061 |
Base, Gasket, and Mounting Bolts |
|
Chevrolet Cars/Trucks 1956-67 |
51129 |
51794 |
|
| |
24067 |
Lube Filter Conversion Kit |
The kit includes an adapter plate, sealing gasket, washers, and instruction sheet. A cap screw (bolt) is not supplied with this kit. All cap screws should be Grade 5, 5/8"-18 UNF-2A. |
Cummins Diesel Engines |
|
|
|
| |
24123 |
Base, Threaded Bushing and Gaskets (Bushings - 3/4-16 x 3/4-24) |
|
Ford Cars/Trucks |
51004, 51271 (Verticle Base Mounted) |
51515, 51773 |
|
| |
24124 |
Base, Threaded Bushing and Gaskets (Bushings - 3/4-16 x 3/4-16) |
|
Ford Cars/Trucks |
51004, 51271 (Verticle Base Mounted) |
51515, 51773 |
|
| |
24730 |
Adapters For Converting Engine Mounted Filters To Remote Mounted Base |
Each adapter has a female thread to mate with the engine male thread stud. Two 1/2" N.P.T. female threaded ports are used for connecting for the flexible oil lines. O-ring sealing gaskets are included with each adapter. |
|
|
|
|
| |
24732 |
Adapters For Converting Engine Mounted Filters To Remote Mounted Base |
Each adapter has a female thread to mate with the engine male thread stud. Two 1/2" N.P.T. female threaded ports are used for connecting for the flexible oil lines. O-ring sealing gaskets are included with each adapter. |
|
|
|
|
| |
24734 |
Adapters For Converting Engine Mounted Filters To Remote Mounted Base |
Each adapter has a female thread to mate with the engine male thread stud. Two 1/2" N.P.T. female threaded ports are used for connecting for the flexible oil lines. O-ring sealing gaskets are included with each adapter. |
|
|
|
|
| |
24736 |
Adapters For Converting Engine Mounted Filters To Remote Mounted Base |
Each adapter has a female thread to mate with the engine male thread stud. Two 1/2" N.P.T. female threaded ports are used for connecting for the flexible oil lines. O-ring sealing gaskets are included with each adapter. |
|
|
|
|
| |
24738 |
Adapters For Converting Engine Mounted Filters To Remote Mounted Base |
|
|
|
|
|
| |
24750 |
Lube Filter Conversion Kits By-Pass Filter For Small Gas And Diesel Engines |
Small engine equipped with cartridge type by-pass filters can be converted to the convenience of a spin-on with this kit. The kit may also be used to add-on supplemental by-pass filtration to provide increased engine protection. A choice of three different sized filters are available. |
|
|
|
|
| |
24755 |
Lube Filter Conversion Kits By-Pass Filter For Small Gas And Diesel Engines |
Large Gas and Diesel engine equipped with cartridge type by-pass filters can be converted to the convenience of a spin-on with this kit. The kit may also be used to add-on supplemental by-pass filtration to provide increased engine protection. A choice of three different sized filters are available. |
Use with 51749 for Cummins Diesel Engines. |
|
|
|
| |
24759 |
Hydraulic Installation Kit |
For fluid flow rates up to 40 gallons per minute, with a maximum working pressure of 100 psi. Special order gasket 15661 is required for use with this base. (The filter bypass (25 psid) valve is located in the adapter base. |
|
|
|
|
| |
24762 |
Remote Mount Spin-On Filter Bases |
Mounting holes are conveniently located. Vertical inlet and outlet ports are 1/2" female N.P.T. Select suitable filter from listing. |
|
|
|
|
| |
24763 |
Remote Mount Spin-On Filter Bases |
This remote mount base may be used in a variety of applications including lube, fuel, hydraulic and transmission. It features double inlet and outlet horizontal ports. Two brass plugs are included for blocking off the unused ports. Three mounting holes are provided. A variety of filters may be used from the list. |
|
|
|
|
| |
24764 |
Remote Mount Spin-On Filter Bases |
This remote mount base may be used in a variety of applications including lube, fuel, hydraulic and transmission. It features double inlet and outlet horizontal ports. Two brass plugs are included for blocking off the unused ports. Three mounting holes are provided. A variety of filters may be used from the list. |
|
|
|
|
| |
24766 |
Remote Mount Spin-On Filter Bases |
This remote mount base may be used in a variety of applications including lube, fuel, hydraulic and transmission. It features double inlet and outlet horizontal ports. Two brass plugs are included for blocking off the unused ports. Three mounting holes are provided. A variety of filters may be used from the list. |
|
|
|
|
| |
24768 |
Remote Mount Spin-On Filter Bases |
This remote mount base may be used in a variety of applications including lube, fuel, hydraulic and transmission. It features double inlet and outlet horizontal ports. Two brass plugs are included for blocking off the unused ports. Three mounting holes are provided. A variety of filters may be used from the list. |
|
|
|
|
| |
24770 |
Remote Mount Spin-On Filter Bases |
This remote mount base may be used in a variety of applications including lube, fuel, hydraulic and transmission. It features double inlet and outlet horizontal ports. Two brass plugs are included for blocking off the unused ports. Three mounting holes are provided. A variety of filters may be used from the list. |
|
|
|
|
